F-SBAND 5 GHz RF over Fiber Transmitter and Reciever

F-SBAND 5 GHz RF over Fiber Transmitter and Reciever

The F-SBAND is used to transmit and receive uplink and downlink signals up to 5 GHz. This is useful for links in between control rooms or NOCs. The F-SBAND system offers a high performance alternative to conventional coaxial link systems, both reducing attenuation and eliminating the need for a waveguide. The unit functions as a transperent link, transporting all satellite modulation formats over a single fiber. Typically an S-Band fiber link consists of an optical transmitter that recieves the RF signal and transmits it over singlmode fiber to an optical reciever which converts the optical signal back to RF. The F-SBAND link is a cost effective and high performance solution for S-Band Satellite links.

Product Features

• Useful Bandwidth up to 5 GHz
• Highly Linear for Analog Transmission
• Low RIN, Narrow Linewidth DFB Laser
• Broadband LiNbO3 Modulator
• Linear PIN reciever with TIA
• Optional single port design allows Bi-directional Transmission with 1 fiber
• Optional RF amplifier to enhance gain

F-SBAND 5 GHz RF over Fiber Transmitter and Reciever

Specifications

Frequency Range                                       1070 0 - 5000 MH z
Out of Band Rejection                                 >70 dB
Flatness                                                      ± 0.2 dB / 48 MHz
± 0.7 / 500 MHz (typ.)
± 1.0 / Full band (typ.)
Intermodulation                                           -50 dBc (max.), -55 dBc (typ.)
CNR                                                           (36 MHz BW) >50 dBc
Input Signal
Low Gain Setting                                        -25 to -40 dBm
High Gain Setting                                        -10 to -40 dBm
Output Signal
Low Gain Setting
High Gain Setting
Gain Stability @ Constant Temp                ± 0.15 dB / 24 hours
OIP3 (from min to max gain)
Low Gain Setting                                        -15 to 0 dBm (typ.)
High Gain Setting                                       0 to +15 dBm (typ.)
Noise Figure @ max input gain
Low Gain Setting                                        <22 dB (typ.)
High Gain Setting                                       <9 dB (typ.)
Group Delay Variation:                               Peak to peak 0.4 ns (typ.)
SFDR >100 (typ.)
Input/Output Impedance                             50 Ohm
Input/Output VSWR                                    1.4:1
Maximum RF Input (with no damage)
High Gain Setting                                        -10 dBm
Low Gain Setting                                        +5 dBm
Gain Control Manual front panel                 standard
(Fixed gain optional)
Test Port Coupling                                      20 dB ± 1.0