H-E1T1-IP E1/T1 over IP TDM Transport System

H-E1T1-IP   E1/T1 over IP TDM Transport System
 
Our H-E1T1-IP systems offer you a way to extend the range and functionality of your E1 or T1 connections.  A TDM over IP bridge is a device that transports the E1/T1 signal over an IP based Ethernet network.  This is useful for Telecom providers as a means of providing T1 service over their existing packet switched infrastructure.  Another popular application is providing T1 links over low cost wireless LAN bridges, eliminating the need for much more expensive microwave radio links.  Wireless links of up to 20 km are possible with this approach.  H-E1T1-IP systems operate transparently providing a seamless connection to all equipment with a physical E1/T1 interface such as a PBX, Cellular base station, SS7 signaling equipment, or voice mail system.  We provide TDM over IP systems for up to 16 T1 or E1 lines.

Product features

  •  Up to 16 T1 or E1 links can be multiplexed over IP with a single device
  •  provides transparent links over packet based IP networks
  •  Provies support for both point to point and point to multipoint applications
  •  Supports SNMP for remote network managment and monitoring
  •  Support for fractional E1/T1 of both framed and unframed interfaces
  •  Minimal cost for installation and support

Drawings

Specifications

E1/T1 Transmission
Protocols Triple mode: RTP, Minimal Header Ethernet, AAL1 configurable
End to End Delay 0.7 msec plus network delay jitter
Packet Size 42~1496 bytes, configurable
Signaling Relay Transparent or guaranteed delivery(configurable)
Clock Distribution
Clocking Options Loopback; Adaptive
Clock recovery algorithm Proprietary, patent pending
Clock recovery performace G.823 compliant
PDV compensation 0~800 msec, configurable
Ethernet Traffic Processing
Rate Limiting 0~100 Mbps, configurable
VLAN tagging and QoS 802.1p, 802.1q
Filtering/Forwarding 1,000 MAC address bridging table
IP traffic Processing
Internet Protocol Support Telnet, HTTP, TFTP, SNMP, TCP, UDP, RTP, ARP, ICMP
E1 Interface
Connectors BNC or RJ48 (optional)
Standards ITU-T Rec. G.703, G.704, G.706, G.732, G.823
Framing Unframed, CRC4 MF, CAS MF
Data Rate (per port) 2.048 Mbps
Line Code HDB3, AMI
Jitter/Wander Performance ITU-T G.823
Receive level 0 to -43 dB; 0 to -15 dB
Line Impedance 120 Ohm (balanced)
T1 Interface
Connectors BNC or RJ48 (optional)
Standards AT&T TR-62411, ITU-T Rec. G.703, G.704, ANSI T1.403, G.824
Framing Unframed, SF, ESF, D4
Data Rate (per port) 1.544 Mbps
Line Code AMI, B8ZS
Jitter/Wander Performance AT&T TR-62411
Receive level 0 to -36 dB; 0 to -15 dB
Line Impedance 100 Ohm (balanced)
Uplink Interface (Ethernet)
Port/Connector Auto-negotiating 10/100 Mbps / RJ45 8-pin Ethernet
Standards IEEE 802.3, 802.3u
Range Up to 100m on UTP Cat5
Local Management Interface
Port RS232/V.24(DTE) 115kbps D-type 9-pin(F)
User client CLI Client
Remote SNMP managment
Port Network or user Ethernet Port
User Client Telnet to CLI; GUI Client
Environmental Conditions Operating temperature 0~50/32~112
Humidity 0~95% non-condensing
Power Supply 110~220VAC, -48VDC
Enclosure Dimensions 26 cm x 15 cm x 4.5 cm
Weight 2.5 kgs